 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Bleed, Inhibitor, Dual Biocides (Pri: ORP, Sec: 7-day timer for Chlorine & Bromine Pumps)
|
|
Controls Tower TDS via bleed. Includes inhibitor dosing and biocide dosing via ORP control. Secondary biocides Chlorine & Bromine pumps for 1:3 dose ratio
|
|
 |
|
DP-CAPH-RXPP
| |
DIGICHEM Plus+ controller with Inhibitor, Non-oxidising Biocide, Chlorine & Bromine Peristaltic Pumps with manifold on PVC backboards (Incl. Flow switch, Bleed solenoid valve, Conductivity, pH, ORP & Ground probes).
|
|
|
|

| |
Features
- Internet Based Connectivity as an option
- Monitoring and control of Conductivity/TDS, pH and ORP simultaneously
- On-board data logging
- Continuous readout of Conductivity, Temp, pH & ORP with each setpoint on backlit LCD
- Display and logging of cycles of concentration of the cooling tower
- Manual slug dose feature on all pumps
- Inhibitor modes: On bleed, After bleed, 24/7 cycle, Proportional to make-up
- Ability to measure and log cooling tower make-up and bleed water flow rate & consumption
- Inhibitor, Non-oxidising biocide, Chlorine & Bromine pumps. Ratio of Chlorine to Bromine is approx. 3:1.
- Disinfection feature to allow ORP control to a temporary high setpoint
- 28 Day Timers for disabling pH & ORP output if continuous control not desired.
- 28 Day Biocide Dosing programs (max 70 per week)
- Password protection
|
| |
Data Sheet
Instruction Manual
Installation Drawings
More Info
|
Glossary |
Search |
Top
|
 |
|
DP-CAPH-RXPP-CAB
| |
DP-CAPH-RXPP with controller & pumps in IP66 Polyester hinged cabinet. Pumps plug into GPO's.
|
|
|
|

| |
Features
- Similar Features to DP-CAPH-RXPP
- Digital controller & pumps in hinged lockable, PC+ABS cabinet, mounted with manifold on separate PVC back panel
- Pumps plug into GPO's
- Extra GPO's for additional pH and Dispersant pumps
- Weatherproof - IP66 rated
|
| |
Data Sheet
Instruction Manual
Installation Drawings
More Info
|
Glossary |
Search |
Top
|
 |
|
DP-DCAPH-RXP-X/6S
| |
DIGICHEM Plus+ Controller with 6 GPO's for Optional Dosing Pumps on PVC backboard. Manifold on separate PVC backboard (Incl. Flow switch, Bleed solenoid valve, Conductivity, pH, ORP & Ground probes).
|
|
|
|

| |
Features
- Internet Based Connectivity as an option
- Monitoring and control of Conductivity/TDS, pH and ORP simultaneously
- On-board data logging
- Continuous readout of Conductivity, Temp, pH & ORP with each setpoint on backlit LCD
- Display and logging of cycles of concentration of the cooling tower
- Manual slug dose feature on all pumps
- Inhibitor modes: On bleed, After bleed, 24/7 cycle, Proportional to make-up
- Ability to measure and log cooling tower make-up and bleed water flow rate & consumption
- GPO's for Inhibitor, Non-oxidising biocide, pH, Chlorine, Bromine, & Dispersant pumps
- Disinfection feature to allow ORP control to a temporary high setpoint
- 28 Day Timers for disabling pH & ORP output if continuous control not desired.
- 28 Day Biocide Dosing programs (max 70 per week)
- Password protection
|
| |
Data Sheet
Instruction Manual
Installation Drawings
More Info
|
Glossary |
Search |
Top
|