DP-CAPH-RXPP-CAB (Bleed, Inhib, BioA, pH, ORP via CL2 & Br Pumps)

  • Digital controller & pumps in hinged lockable, PC+ABS cabinet, mounted with manifold on separate PVC back panel
  • Pumps plug into GPO’s
  • Extra GPO’s for additional pH and Dispersant pumps
  • Internet Based Connectivity as an option
  • Monitoring and control of Conductivity/TDS, pH and ORP simultaneously
  • On-board data logging
  • Continuous readout of Conductivity, Temp, pH & ORP with each setpoint on backlit LCD
  • Display and logging of cycles of concentration of the cooling tower
  • Manual slug dose feature on all pumps
  • Inhibitor modes: On bleed, After bleed, 24/7 cycle, Proportional to make-up
  • Ability to measure and log cooling tower make-up and bleed water flow rate & consumption
  • Inhibitor, Non-oxidising biocide, Chlorine & Bromine pumps. Ratio of Chlorine to Bromine is approx. 3:1.
  • Disinfection feature to allow ORP control to a temporary high setpoint
  • 28 Day Timers for disabling pH & ORP output if continuous control not desired.
  • 28 Day Biocide Dosing programs (max 70 per week)
  • Password protection
Compare
SKU: DP-CAPH-RXPP-CAB Category: Tag: Brand:

Description

Superseded
DIGICHEM Plus+ Firmware upgrade Compatibility Rev 1.0
DIGICHEM Plus+ Tips for Remote Setup & TroubleShooting v1.0
DP-CA DIGICHEM Plus Data Sheet v1.2
DP-CA DIGICHEM Plus Instruction Manual v5.0
DP-CAPH-RXPP or similar Installation Instructions v1.1
DP-CAPH-RXPP-CAB Assembly Diagram
DP-CAPHP-RXP-CAB Spare Parts Exploded Rev 01
Superseded
DIGICHEM Plus+ Firmware upgrade Compatibility Rev 1.0
DIGICHEM Plus+ Tips for Remote Setup & TroubleShooting v1.0
DP-CA DIGICHEM Plus Data Sheet v1.2
DP-CA DIGICHEM Plus Instruction Manual v5.0
DP-CAPH-RXPP or similar Installation Instructions v1.1
DP-CAPH-RXPP-CAB Assembly Diagram
DP-CAPHP-RXP-CAB Spare Parts Exploded Rev 01
Name
Superseded

Additional information

Configuration

Controller & Pumps Mounted In Cabinet, Wall Mount

Variables Measured

Conductivity, Flow Status, Flow Volume, ORP, pH, TDS, Temperature

Inputs

Conductivity Probe with Electrodes & 47K NTC, Flow Switch Contact, ORP Probe, pH Probe, Water Meter Bleed Pulses, Water Meter Make-up Pulses

Outputs

Alarm Relay

Data Logging

Included

Remote Comms

Via Optional Modem

Max Pressure / Temp

2.7 bar @ 50°C

Port Size

20mm Solvent Weld

Materials

PVC Manifold, Solenoid valves brass

IP Rating

IP65

You may also like…

  • ST-2P-P Optional System mounted to SS304 Skid, incl. ONGA 413 pump

    ST-2P-P Optional System mounted to SS304 Skid, incl. ONGA 413 pump

    Compare
  • Cold Water Meters 15mm to 50mm - ARAD Multijet

    Cold Water Meters 15mm to 32mm – ARAD Multijet

    Compare
  • CR-2C-V-PVC-A 20mm (3/4 inch) Coupon Rack

    CR-2C-V-PVC-A 20mm (3/4 inch) Coupon Rack

    Compare
  • ONGA-413 Centrifugal pump 60 l/min @ 10m head

    ONGA 413 Centrifugal pump 60 l/min @ 10m head

    Compare
  • RV ILS-X-T20E Transparent Bowl Strainers 20 mesh (915 micron)

    RV ILS-X-T20E Transparent Bowl Strainers 20 mesh (915 micron)

    Compare